Since we released our Overwatch cosplay costumes, we have been asked multiple times about the availability of their armors and props. Sadly, we do not have plan for that. But here, we can show you how to make the D.va Hana Song headphones.
- 5mm thick EVA sheets,
- hot melt glue,
- hot melt glue gun,
- iron wire,
- art knife,
- spray paint.
Firstly, we divide the whole headset into three parts as the picture below (green piece, red piece and blue piece)
We will start from the GREEN part.
Measure your head size, and cut to get two long EVA strips, obviously it will serve as the connection between the two earphones.
Notch in the middle and build in an iron wire or it would be too fragile. Add some glue to fix.
Then glue the two pieces together.
Take care of the details of the green piece.
Prepare two rectangular EVA pieces as below, notch in the middle and then bend.
Finish this, attached then onto the long piece, bend the whole piece into shape.
Next big step: making the BLUE part.
You can refer to the breakdown view in the following picture; it is made up of such 4 small pieces.
Cut the EVA sheets accordingly.Then get all these pieces in position and glue them together, done with the blue part.
Next, the RED part.
See the breakdown picture, it is a little complicated, but same rule.
Hope it may be more helpful in this way
Finally, we move to coloring!
Brush a coat of white latex first before painting each part.
When it dries out, glue them together
(cosplayer: Madison Kate, costume from Miccostumes)