Oerwatch Dva

How to Make Overwatch D.va Headset For Cosplay

Since we released our Overwatch cosplay costumes, we have been asked multiple times about the availability of their armors and props. Sadly, we do not have plan for that.  But here, we can show you how to make the D.va Hana Song headphones.

Main Materials:

  1. 5mm thick EVA sheets,
  2. hot melt glue,
  3. hot melt glue gun,
  4. iron wire,
  5. art knife,
  6. glue,
  7. spray paint.

Firstly, we divide the whole headset into three parts as the picture below (green piece, red piece and blue piece)Dvaa

We will start from the GREEN part. (more…)

Read More

Janna

How To Make League Of Legends Storm’s Fury Janna Wand For Cosplay

Do not be captivated by Janna’s beauty. Like the wind, she is one gust away from terrible destruction.

As Janna is also called the Storm’s Fury in League of Legends, she is a powerful mage and uses a

wand to generate storms! We have completed the Janna costume, and now we would like to share

a way of making her weapon out of EVA sheets and a pipe.

Materials: pencil, paper, knife, EVA sheet, pipe, light blue glitter paint, white latex or poly-putty base.

First step, draw the weapon shape on a piece of paper, be sure it’s life sized.
Cut it off and we got a paper pattern. Then trace it onto the EVA sheet and cut along the line.
We need two EVA patterns here. janna a  (more…)

Read More

jojo cosplay

How to Style JoJo’s Bizarre Adventure Josuke Higashikata Wig For Cosplay

Speaking of Josuke Higashikata features, usually what comes first to the mind is the well

-maintained pompadour.  As we all know that his special hairstyle is after an unknown man

who saved his life as a child. To cosplay Josuke, styling the wig becomes important, so in this

article we are sharing a detailed tutorial for cosplayers to shape the pompadour hairstyle.

What to prepare:

  1. A chignon of long strip shape (a spongeor any strip shaped flexible stuff)
  2. Scissors
  3. Hot melt glue
  4. Styling gel
  5. Hair spray

jojo aFirst big step is to make the pomp shape swept upward forehead.Get a long wig of similar color, and cut off a bunch of hair which is to be twined onto the blacklong chignon. To ensure the after style, it’s better to cut from the back. (Length as pictured below) It can be thinner as long as the purple hair can fully cover  the black strip.jojo bUse a hot glue gun to apply a layer of glue onto the black strip first and then add the purple  hairs.jojo cTo make the hair glued firmly, you need to press it a little. But it might be too hot to touch immediately after the hot glue gun, do this one or two minutes later.jojo d (more…)

Read More

Remake editoin

How to Make Cloud Strife Armor–Final Fantasy VII Remake

Do not get too excited on the announcement of the Final Fantasy VII Remake, we are presenting  the FF 7 Cloud Strife armor for cosplay! It is time to get real,and let’s see how they were developed.

Generally, the full set Cloud armor includes 2 forearm bracers and a pauldron. Firstly, we start  from the basic pattern making for the shoulder pad. (more…)

Read More

OPM

How to Make One Punch Man Genos Arm For Cosplay

aaa

Blond Cyborg! Yes, you did not hear it wrong; One Punch Man Genos becomes possible to cosplay in a simple way. Here we are providing a step-by-step tutorial specified for Genos cosplay arms.

Materials: cutter, pencil, glue, compass, set square, EVA panels of 3mm and 5mm thickness, and most importantly, your hands!

First step: making basic patterns of shoulder pieces, upper arms and forearms. Here 3mm EVA sheets were used as sketchpad, and other materials like paperboard or Kraft paper are also workable.

ACC

ABB

Draw patterns, after done, redo the drawing on EVA panels of 5mm thickness.
For symmetrical pieces, flip side.

ADD

Cut off the basic pieces along the line, better not to use scissors or the sunken cutting edge will lead to joint gaps when gluing.

AEE

Glue the pieces together. If the pieces need to be in tubby or curve shape, bend them with hands beforehand. This process will make gluing easier.

AFF

When finishing the main piece gluing, you can get started at making the patterns of decorative design. Draw figure lines according to the base pieces first.

AGG

Similarly, re-drawing the figure and cut them into shape.

AHH

Glue the decorative pieces and fit them with main pieces like the following picture.

AII

Pin the rivet on the forearm pieces as pictured, while use electric soldering iron to carve the figure line of shoulder pieces.

AJJ

Use heat gun to blow all over the parts, which will improve the hardness and shaping of the EVA, at the same time, the pores at EVA surface will shrink.AKK

Base coat: chassis armor paint of car use was chose, as it’s of larger granules and can greatly resemble the iron effect. Also the surface treatment of white glue paint can be saved.

ALL

Metallic coloring : Before the black pant get dry, quickly spray Chromium plating color on the surface, and let the two pants mixed together.AMM

If you have come to this step, congratulations! You are finishing the Genos Cyborg arm, what’s next? Put on and posing for cool photo shoot!

DFF

PS:

Cosplayer NiphDUBS and ModeratelyOkay shared their Genos cosplay using our cosplay aroms, and they even add led lights in it,amazing!

Read More