Are you a comic con goer or a fan of cosplay? Well, if yes, for those we are offering sponsorship opportunities. Any one, who are frequently goes to anime conventions,cosplay parties, comic cons etc, can apply for being our invited reporters of our blog.
The invited reporters should monthly provide 3-4 quality original articles which have never be posted anywhere else; except from convention topics , other cosplay related writtings like tutorials are also acceptable.
In return, we will quarterly sponsor the writer a free cosplay costume including wig, cloth and shoes from our shop .
There are the upcoming comic cons in the next 6 months, reports with high quality photos (at least 5-10 photos) about the following conventions are welcomed. Two examples are offered for your reference.
If you are intersted, please do not hesitate and it’s better to contact us first.
As we announced in a previous post, we were developing One Punch Man Genos Cyborg Arm, now time to check the outcome.
Full set armor has been developed including shoulder armor, upper arm and forearm pieces, as well as gloves.
For New Year’s sale, we started a pre-sale event of Genos cyborg arm during Dec 29 2015 to Jan 12th 2016. If you are a fan of One Punch Man, It would be a pity to miss it.
Let’s take a close look at our final prodcut:
It is made from light weight EVA sheet, which allows for full range of motion.
All armors are crafted by hand. The accurate pattern drawing and cutting provide the armor of smooth lines and contour. You can see how it looks on our model; it’s quite close fit while looking natural.
As to how to keep each piece in position, well, special built-in elastic Velcro straps are crafted to prevent slippage or looseness, which also allows cosplayers of different arm sizes to wear. Moreover, two sizes are available for a wider range of choice.
Metallic color is applied evenly without any fading problem.
To revivify the figure in the anime, much attention has been paid to every detail such as seamless gluing, curve radian, hardness and delicate decorative parts.
“I am willing to do anything to become more powerful”, Genos has been willing as always, how about you?
“There’s been an awakening. Have you felt it?”
Bet no one did not. Star Wars: The Force Awakens excites the world fans, at the same time, our prominent female Jedi Rey shows up. What’s more exciting? Cosplay her! Here we summed up a complete cosplay tutorial for Rey’s hair, goggles, staff and costume
As a Jedi, Rey’s goggles is kind of the epic part of her whole look. Blue lenses would help a lot, but let’s trying to make it solid and detailed
Thanks for Juliaeisler, she shered tips for making the Rey’s goggle on Instructable, you may not want to miss this.To create these, you’ll need two different pairs of goggles, pair one and pair two.Remove the blue lenses from the first pair and attach them onto the second using E6000 glue before covering them in linen fabric. Place beige felt over the line to enhance the authenticity of the googles and to help give them the proper shape. Add gray felt to the top and the bottom of the goggles.
To give the goggles their distinctive detailing, using craft leather you can add on the character’s rusty leather pieces using glue. Then use a black permanent marker to draw on the markings around the lenses. With black and gray spray paint and a sponge you’ll be able to customize the goggles to look the way that you want.
Here Matt Shanley, his tutorial for making the Rey’s costume is really helpful and detailed.
For Rey’s shirt, use a white Chiffon tank and cut it into a V-neck. Sew the edges on the neckline. This shirt should be billowy and long enough to sew the dress onto. Spray this dress with the brown, black, and beige on the edges and leave the center white.
For this project, 13 yards of beige Cotton Gauze fabric were used. This was the most expensive part of the costume, but well-worth the investment. It billows nicely and is translucent to the light coming through, but thick enough to be opaque if pleated.
First, pin all of the pieces onto a dress form to achieve the perfect fit or drape around yourself and pin as you go. Save yourself some trouble and have someone help with this. Pinch the fabric into pleats in to gather at the shoulders. Drape the gathered fabric across the chest.
Sew the four pieces of fabric onto the white shirt and place it where it would fit on my body. This will keep it from unraveling. Take the additional pieces and sew them to pieces that you already sewed on. This is where you can get most creative because you are able to fit this exactly to your body.
Take the “shirt” off and place it back onto a dress form or lay out flat and spray it with black, brown, and beige to give it more dimensions. Highlight the shoulders and the four ends of the fabric more to make them stand out. Once it dries, wet it in cold water and toss it in the dryer so it isn’t as stiff.
Beige linen fabric can be used as cowl, just Place the cowl around your head like a headscarf and pin it in the back. Then use the two ends to twist around your head and pin on one side and used the other side to drape around your neck and shoulders.
Easier way for Rey’s pants, just find alike Bohemian-style pants, and Spray it with black, brown, and almond paint to give them more dimension
For belt, find ones that match the black shading on the outside and the rusty brown in the center. Or use paint on brown belts to match the look.
As to Arm and Leg Wraps: Use leftover Cotton Gauze fabric for the arm and leg wraps. Spray them with black, brown, and silver to give an aged look. Cut them into four pieces and sew or safety-pin them to the shirt and pants for them to stay in place when moving around.
Rey has the staff because it is all she can afford, there also are many options for cosplyers , but if you want it as detailed as it’s in the movie, kylegilbert’s tutorial is the very example for you. Some daily materials like showerhead, conduit，cord and canvas were used.
After watching the movie, Rey’s Triple buns can hardly be overlooked. The hairstyle seems easy to operate, but if you are not good at this stuff, it still got your troubled; here we are sharing Silvousplaits’ s video
Finally, before you posing for shooting put on some makeup. Unlike many other characters, Rey’s makeup is very natural and bronze. So a strong brow, bronzer on the cheeks, and light brown on the eyes finish the look.
Needed I bring up the recent hot anime One Punch Man? If watched, you can hardly forget Genos, the so-called Demon Cyborg. The transformed body and cyborg arms give him unlimited potential of fighting power, as well as a super cool appearance.
It can’t be cooler to cosplay Genos, but the Cyborg arms may be a barrier for many people. There are many other anime or game characters of unique robot arms, such as Edward from Fullmetal Alchemist, Winter Soldier from Captain America, Gaige from Borderlands. An authentic and quality robotic arm would definitely be an eye-catching at conventions. Therefore, we sum up 5 different ways to DIY cyborg arms for cosplay, all easy and manageable, start learning.
(1)First goes to the simplest one: drawing on your skin. Grab your makeup pen and start trying like this :
(2)Use paper to make arm patterns, foam and paint for material. This way is also workable for DIY, be patient and check this process explanations.
Vriska as expamle, but we saved the finger part, details you may check the origin.